Technical Data Sheet
Material application : PVC insulation compound for fixed installation cables
Designation: According to IEC 60502-1 (PVC / C)
| No. | Test item | Test standard | Unit | Value | Remark |
| 1 | Tensile strength | IEC 60811-1-1 | N/mm2 | Min. 14.5 | —– |
| 2 | Elongation at break | IEC 60811-1-1 | % | Min. 175 | —– |
| 3 | Tensile strength | IEC 60811-1-2 | N/mm2 | Min. 14± 20% | After ageing at 80±2°C, 168 h |
| 4 | Elongation at break | IEC 60811-1-2 | % | Min. 160± 20% | After ageing at 80±2°C, 168 h |
| 5 | Loss of mass | IEC60811-3-2 | mg/cm2 | Max. 2 | —– |
| 6 | Hot pressure deformation | IEC 60811-3-1 | % | Max. 50 | At 80±2°C |
| 7 | Cold and heat bending | IEC 60811-1-4 | —– | No cracks | —– |
| 8 | Cold impact | IEC 60811-1-4 | — | No cracks | —– |
| 9 | Thermal stability time | IEC 60811-3-2 | Minute | 90 | 200±0.5°C |
| 10 | Hardness | ASTM-D 2240 | — | 87 | Shore A |
| 11 | Density | ASTM-D 792 | gr/cm3 | 1.50 | —– |
| 12 | Flame retardants test | IEC 60332-1 | mm | Min 150 | —– |
| 13 | Cold elongation at break | IEC 60811-1-4 | % | Min 20 | On dumb-bells at -15±2°C |
| 14 | Color | Visual | —– | Acc. to order | —– |
| 15 | Loss of color | Visual | —– | Color stability | —– |
Production guide
Extruder temperature profile (just for notice)
| Head | 3 | 2 | 1 | Zone |
| 170-180°C | 155-165°C | 140-150°C | 130-140°C | Temperature |
Notice:
Packing: One bag of 25kg, 50 bag on the pallet (1250kg)
Storage condition:Dry place , away from sun light and temperature lower than 30°C