Technical Data Sheet
Material application: PVC compound coating for metallic flexible conduits
Designation: OP 515
| No. | Test item | Test standard | Unit | Value | Remark |
| 1 | Tensile strength | IEC 60811-1-1 | N/mm2 | Min. 17.5 | —– |
| 2 | Elongation at break | IEC 60811-1-1 | % | 250 | —– |
| 3 | Tensile strength | IEC 60811-1-2 | N/mm2 | Min. 16 | After ageing at 100±2°C |
| 4 | Elongation at break | IEC 60811-1-2 | % | 225 | After ageing at 100±2°C |
| 5 | Loss of mass | IEC 60811-3-2 | Mg/cm2 | Max. 1.5 | At 100±2°C |
| 6 | Hot pressure deformation | IEC 60811-3-1 | % | Max. 25 | At 80±2°C |
| 7 | Cold and heat bending | IEC 60811-1-4 | —– | No cracks | —– |
| 8 | Cold impact | IEC 60811-1-4 | —– | No cracks | —– |
| 9 | Thermal stability time | IEC 60811-3-2 | Minute | Min. 90 | |
| 10 | Hardness | ASTM-D 2240 | —– | 82 | Shore A |
| 11 | Density | ASTM-D 792 | gr/cm3 | 1.40 | —– |
| 12 | Flame retardants test | IEC 60332-1 | mm | Min. 150 | —– |
| 13 | Cold elongation at break | IEC 60811-1-4 | % | Min. 20 | On dumb-bells at -15±2°C |
| 14 | Color | Visual | —– | Acc. To order | —– |
| 15 | Loss of color | Visual | —– | Color stability | —– |
Production guide
Extruder temperature profile (just for notice)
| Zone | 1 | 2 | 3 | Head |
| Temperature | 130-140°C | 140-150°C | 155-165°C | 170-180°C |
| Surface observed quality | confirmed |
Notice:
Packing: One bag of 25kg, 50 bag on the pallet (1250kg)
Storage condition : Dry place , away from sun light and temperature lower than 30°C